Tests for floor slip resistance are conducted in both dry and wet circumstances. The floor's slickness is measured using this metric. Regulation of floor slip resistance should be enforced because the legislation does not cover slippery floors.
The slip test is used to determine the level of
danger. The pendulum test is a reliable method of determining a floor's slip
resistance and is widely accepted. The slip resistance of a floor surface and
its friction levels can also be measured using a friction test and a
micro-roughness test.
The standard by which a floors slip resistance is
measured is its pendulum test value or PTV rating. A rating of 0 to 25 is
considered good, and a rating of 25 to 35 is considered average; however, a
rating of 35 or above is considered harmful for any floor, even when dry. Slip
incidents and possible injuries might occur at a higher risk for those over 35.
If the PTV is lower, such locations as swimming
pools and staircases are riskier. The PTV should be in the range of 0 to 25 in
these areas. The moderate plain surface is deemed dangerous for stairs and
swimming pools even if it is in the moderate category.
If the pendulum test results indicate that a
floor's slip resistance can be hazardous, an anti slip treatment utilizing a
variety of techniques is recommended.
No comments:
Post a Comment